Rollvento SW-150 Swing Gate Operator

Name: Rollvento SW-150 Swing Gate Operator
Brand: Rollvento
SKU: SW-150

What the SW-150 delivers

A linear actuator for swing gates, supplied as a matched pair with a control unit and mounting hardware. Technical specifications for this model are being issued separately — request the datasheet for leaf weight, stroke and power ratings before specifying.

Technical information

Values as published in Rollvento product data, grouped for quick reference. Open a section to view details; confirm site-specific parameters with engineering before ordering.

Get a Quote

1 sections · 5 items

Bracket positions are set from the manufacturer’s geometry table (A/B dimensions) so the actuator reaches full stroke at 90° without binding.
Actuators are fitted to the pillar bracket first, then to the leaf bracket with the gate closed.
Mechanical stops are fitted in the ground at the open and closed positions.
The control board learns leaf travel, sets slow-down zones and obstacle sensitivity, and configures leaf delay so overlapping leaves close in the correct order.
Photocells are installed on both sides of the opening; the release key is tested with the power isolated.

FAQ

SW-150: frequently asked questions

Where is the SW-150 used?

Typical applications: .

What is the difference between sliding and swing gate automation?

A sliding gate moves sideways along a track or cantilever and needs space beside the opening; it is driven by one rack-and-pinion motor. A swing gate pivots on hinges and needs clear space to swing; each leaf has its own operator. Sliding gates suit sloped driveways and limited swing space; swing gates suit level ground where lateral space is limited.

How heavy a leaf can a linear actuator move?

Rollvento SW-series linear actuators are rated for leaves from 200 kg to 400 kg with leaf lengths up to about 2.0–3.0 m depending on model. Heavier leaves up to 600 kg use the PK series. Always check both the weight and the length limit.

Related models